Roof Pitch Calculator

Convert rise and run into pitch, degrees, and slope percentage. Use the area multiplier to estimate sloped roof area from a horizontal footprint.

Roof measurements

I know the roof’s

Use the same unit for both measurements. Run is the horizontal distance along the plan.

Rise is vertical. Run is horizontal.

Your roof pitch

—

Rise per 12 units of run

Enter a rise and a horizontal run to calculate pitch.

Angle
—
Slope
—
Area multiplier
—
Sloped roof area
—
Open the cost calculator

Roof pitch chart

A 6:12 roof rises six inches for every twelve inches of horizontal run. Its angle is 26.57°, and its area multiplier is about 1.118.

PitchAngleSlopeArea multiplier
3:1214.04°25.00%1.031
4:1218.43°33.33%1.054
6:1226.57°50.00%1.118
8:1233.69°66.67%1.202
10:1239.81°83.33%1.302
12:1245.00°100.00%1.414

How roof pitch affects area

Multiply the horizontal footprint by the area multiplier for a roof with one pitch. For example, a 1,200 sq ft footprint at 6:12 produces 1,341.64 sq ft of sloped area. If the roof has sections with different pitches, use the right multiplier for each section and add the results.

On a symmetrical gable, the run of one side is half the full span. Use measurements from plans or an installer.

Read the calculation method